2000 Winni Back-Up Camera and Monitor
Hi Folks - looking for some help and or experience on replacing back-up monitors, I know an old topic. I have a 2000 MY Itasca 35U. I wanted to add side cameras for backing into a narrow garage. I ended up getting a good deal on a Voyager AOM-7694 Color monitor, the replacement was fairly easy in the IP since the Sony and the Voyager were similar size. The voyager side view cameras which I purchased work fine and the Sony camera worked fine as well.
Now the fun part, I want to adapt my Sony 4-pin B&W back up camera to the Voyager Monitor. The RVCams guys do sell the adapter cable but you need to add the monitor to the purchase, they won't sell it by itself. Any ideas on how to splice? Jensen told me to contact Sony on pin assignments, but I wanted to know if anyone has done this before.
Sony Camera / Cable 4-wires, a heavy gauge RED with some support in the wire, black, white and what appears to be a clear plastic wrapped silver wire.
Voyager adapter cable for splicing - 4 wires,Red, Black and White and a copper wrapped yellow cable which I'm told is video. The Red is power and Black is ground and White is audio.
I tried the obvious connection above, but no picture. I know that i need to connect the camera to channel 1 and I'm waiting for the adapter cable, but I figured it should work on channel 2 as well. But no luck.
I added a few pics of the connections - if anyone knows how the Sony Camera is configured I would appreciate any feedback. Thanks again for your help.
|