2002 sightseer help

[jimmyjnr]

Discovered that the pipework from our motoraid heater was never connected into the engine cooling system, pipework is just laying across engine, thanks to the advice of others on this forum i know i should tee into the dash heating matrix . If anyone has photos of this connection or advice on how to identify the pipes i should break into, it would be a great help . thanks jim
james-shaw@live.com

[DriVer]

Quote:

Originally Posted by jimmyjnr Discovered that the pipework from our motoraid heater was never connected into the engine cooling system, pipework is just laying across engine, thanks to the advice of others on this forum i know i should tee into the dash heating matrix . If anyone has photos of this connection or advice on how to identify the pipes i should break into, it would be a great help . thanks jim james-shaw@live.com

Have you tried looking at the plumbing diagrams? Winnebago Industries Plumbing Diagrams

[jimmyjnr]

Thanks to everyone for their help, i found a bypass pipe where the motoraid pipework should be connected , changed it over today. Now working on reversing lights (constantly on with ignition) disconnected switch on side of transmission , no change !!!!