Community Forums

Kelm130 · 12-20-2014, 10:10 AM

Hi Everyone - I just moved my Journey from one storage place to one closer to home and when I was about to leave I noticed the microwave flashing it's start message.

Obviously the inverter is on but I cant turn it off. Should the Xantrex Freedom remote panel have some lights on it when the inverter is on?

I started the generator just to see if it would kick something on or off but it didn't change anything and nothing on the Xantrex panel either. I can't remember if there should be anything or not??

I turned off all the circuit breakers for now but what am I missing here? Still a little new to the rig and learning.

Thanks
Ben

Kelm130 · 12-20-2014, 11:52 AM

Problem solved. Unplugged the cable from the back of the inverter's Freedom Remote control panel, let it sit a few minutes and plugged it back in. Indicators lite up and I was able to turnoff the inverter. I've read in other posts where this seems to be a troubleshooting first step for any kind of strange inverter behavior.

Its the IT support department equivalent of "ummm did you reboot your computer yet?"

I know I'm in IT and I know people hate to hear it buuuuttt... It does fix a lot of problems.