I have replaced the house and chassis batteries .. turned On the house batteries [all lights working inside coach] .. I start the engine .. place it in Park .. apply the Parking Brake [the red indicator light in the upper right hand side of the instrument panel comes on] .. when I push the ON button of the HWH leveling system the NO IN PARK/BRAKE light turns on .. I have tried the sequence 3 times and actually moved the forward and backwards .. and still have the same results .. the coach manual mentions " Some electronic displays and memory functions may need to be reset after power has been reconnected " .. however I can not locate anything in the manual on how to "Reset" .. any suggestions on what to do or what to look for to get the leveling system to respond .. thank you glenn shay
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
had that happen once or twice on our 2000 35U. try releasing the parking brake and then re-applying it.
When the jacks lose battery power they need to be re set remove the two plugs on the back of the control panel count to 20 replug should be good to go. Sometimes it is easier to unscrew the panel to get to the plugs
__________________
Cathy and Gordie Connelly FMCA # F461058
2006 Winnebago Sightseer 29 R
2017 Buick Envision 4 down
Linear Mode
