Community Forums

rdw055 · 12-17-2018, 04:56 PM

I have the stacked washer and dryer . I am trying to remove the dryer to replace the belt and motor bearings. Trying to remove the front of the cabinet to pull out the dryer and it is perplexing. I cannot figure out how they built the cabinets around these appliances, there are a number of screws that are not accessible. Has anyone figured this out ? Any help would be much appreciated.

Five2o · 12-17-2018, 07:59 PM

I've removed my dryer many times...removed the cabinet doors first though. I have a 42AD but assume no need to disassemble your cabinet either.

rdw055 · 12-18-2018, 01:13 PM

Five2o
The AD does have plenty of room in the cabinet to remove the dryer . The QD the stacks are in the rear bath and there dryer is larger then the opening (see image)

Algonquin · 12-20-2018, 07:42 PM

My Winnebago cabinets have "false" inside bottom, top and side panels made thin plywood. These panels are stapled to a hidden wooden cabinet frame which in turn is screwed to the coach wall. The staples must be pried out and the panels removed so that the cabinets can be unscrewed.