Hi all. have a 2007 itasca sunrise. i would like to know how to pin the 16 foot awning so i can disconnect the electric motor and be able to pull it open without loosing the spring tension. i believe there are holes in the ends of the awning frame that i can stick a pin into to stop the spring. thanks
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi all. have a 2007 itasca sunrise. i would like to know how to pin the 16 foot awning so i can disconnect the electric motor and be able to pull it open without loosing the spring tension. i believe there are holes in the ends of the awning frame that i can stick a pin into to stop the spring. thanks
I can't help you but if you know what brand of awning you have you may want to run a search to see if the information might be available from another forum too.