RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Winnebago Industries Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-11-2008, 01:41 PM   #1
Junior Member
 
Join Date: Mar 2008
Location: Wakarusa, Indiana
Posts: 15
I have gotten some advice on a prior on getting a new HD tv for my junk 20" RCA.

I look at the cabinet and I can't figure out how to remove the old tv. The only screws I see are the one's on the bottom panel.

Any advice?
__________________

Ron Davidhizar is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-11-2008, 01:41 PM   #2
Junior Member
 
Join Date: Mar 2008
Location: Wakarusa, Indiana
Posts: 15
I have gotten some advice on a prior on getting a new HD tv for my junk 20" RCA.

I look at the cabinet and I can't figure out how to remove the old tv. The only screws I see are the one's on the bottom panel.

Any advice?
__________________

Ron Davidhizar is offline   Reply With Quote
Old 03-11-2008, 01:54 PM   #3
Senior Member
 
AFChap's Avatar
 
Winnebago Owners Club
Spartan Chassis
Join Date: Aug 2002
Location: ...hopefully on the road!
Posts: 4,948
One way or another, you no doubt have a metal strap running from each side across the top of the TV holding it down. On mine, I had to remove a thin piece of plywood under the overhead cabinet to get to the nuts holding the strap down. On my front TV, I got to the nuts by removing the trim around the TV. You'll likely have to figure out exactly how yours is mounted on your own, unless someone with exactly the same rig can respond!!
__________________
Paul (KE5LXU) ...was fulltimin', now parttimin'
'03 Winnebago UA 40e / '05 Honda Odyssey toad
AFChap is offline   Reply With Quote
Old 03-11-2008, 04:43 PM   #4
Junior Member
 
schaller56's Avatar
 
Workhorse Chassis Owner
Join Date: Mar 2006
Location: Pensacola,Fl.
Posts: 21
On our we had to remove the little dowel plugs on the front frame to get access to the screws holding it on then on each side (front sides there was a nut on each side holding the bracket that holds the TV once these are removed (tight squeeze) the TV should pull straigt out, Also the band holding the TV has a glue substance on it so it all comes out in one piece
__________________
Dave & Kathy Schaller & Missy the Mutt

Pensacola,Florida
schaller56 is offline   Reply With Quote
Old 03-12-2008, 05:45 PM   #5
Senior Member
 
rvten's Avatar
 
Join Date: Nov 2002
Location: Crossville, TN USA
Posts: 1,124
He does not say what model MH he has. But non our 2001 Winn Adventurer. I had to remove the upper and lower trim that is held on with brads. Than remove the lower the lower panel about 8 screws. THan loosen up the metal clamp. Than wrestle the TV out.
__________________
Tom & Bonnie
2008 Winnebago Aspect 29H
A Class C Not a B+
2010 Ford Flex
rvten is offline   Reply With Quote
Old 03-12-2008, 07:51 PM   #6
Senior Member
 
bellsharbor's Avatar
 
Join Date: Apr 2006
Location: Highlands Ranch, Colorado
Posts: 309
Hi Ron:

Did you figure it out yet? On mine, I removed the screws on the bottom panel--loosened the strap--removed the wood lip on the front/bottom. As has been said, it is a tight fit, but it WILL come out. It takes a lot of twisting and pulling. Good luck.

John
__________________

__________________
John and Marion Bell
Highlands Ranch, Colorado
2013 Keystone Bullet 248RKS, 2013 Ram 1500
bellsharbor is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Suncruiser Bedroom TV Removal ? Rockhouse Winnebago Industries Owner's Forum 7 07-28-2008 07:27 AM
Bedroom TV Removal Petro Winnebago Industries Owner's Forum 4 03-28-2008 11:13 AM
Bedroom radio speakers removal 99damon Damon 4 11-11-2007 04:35 PM
bedroom tv brunter Winnebago Industries Owner's Forum 4 09-19-2007 04:20 PM
06 Essex bedroom slide gearbox removal Larry K Thompson Newmar Owner's Forum 3 04-15-2007 01:53 PM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:58 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×