Brake/turn indicator not working

[eieioh]

We just got back from a 5 week trip to the "left" coast. It was wonderful. But, the left turn indicator/brake lamp has quit working. We have a 2003 Winnebago Minnie on a 2002 Ford E450 chassis. I have changed the bulb, sans success. With a probe I get no signal at the fixture. I have been under the rig and get no signal at the connector from the harness that runs to the front of the rig. I have opened the carpet behind the seat and found the connectors there. But cannot figure out which of the leads from the Ford harness I need to check for signal. Anyone have the Ford wiring schematic?

Thanks,

ed

[eieioh]

We just got back from a 5 week trip to the "left" coast. It was wonderful. But, the left turn indicator/brake lamp has quit working. We have a 2003 Winnebago Minnie on a 2002 Ford E450 chassis. I have changed the bulb, sans success. With a probe I get no signal at the fixture. I have been under the rig and get no signal at the connector from the harness that runs to the front of the rig. I have opened the carpet behind the seat and found the connectors there. But cannot figure out which of the leads from the Ford harness I need to check for signal. Anyone have the Ford wiring schematic?

Thanks,

ed

[Chief]

Sounds elementry but have you checked the fuse for that circuit??

[eieioh]

Good idea! But, no joy. The fuse controls both sides of the rig. Only the left side is not working.

Thanks!!

ed

[eieioh]

Thanks to all who read and thought about my problem. The second jog about fuses caused me to go back to square one and reread the Ford oners manual. Two pages of the book were stuck together. Thus it was that I found out about the SECOND fuse block, under the hood.

Yep! You guys were right all along.

Thanks Again,

Ed