Bulbs work, No turnsignals-Flasher Switch?

[ThumbinARide]

I have a 1997 Winnebago Minnie 300. I replaced the turn signal bulbs and neither the turn signals or the emergency flashers work. I suspect I need to replace the flasher switch. Can you tell me where it is, and even the part number, etc I Already tried replacing the bulbs. A local Ford Truck Parts dealer said it is likely 12 Volts, 2 or 3 prong..


Year: 1997
Make: Ford
Model: Ford E450
Engine: 6.8L V10


Already Tried:
Tried replacing the bulbs. A local Ford Truck Parts dealer said it is likely 12 Volts, 2 or 3 prong..

[Stevegd007]

Try looking here: Wiring Diagrams

Also the Lichtsinn folks are real helpful. Give them a call if your stuck.

Also another idea, I lost all my rear lights when a ground wire came off. Found this wire just looking around under the coach back end. Re connected the wire and all my lights worked again.

[ThumbinARide]

Thanks, Steve & Leslie....My first time using the site and the forum and it is awesome. I got several suggestions that were helpful!
Thank you for your concern & interest!
Jeff

[Scooter]

Same thing on my 1994 F-150. Wrong replacement bulbs used. Correct bulbs cleared up the problem.