RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Winnebago Industries Owner's Forum
Click Here to Login

Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 02-24-2017, 01:17 PM   #1
Junior Member
rmatt's Avatar
Winnebago Owners Club
Join Date: Jan 2017
Posts: 21
Captains Chair

I have a 2002 Journey DP with a non power chair. I have acquired a new old stock 6 way chair, mfg unknown. The person I got it from said he purchased it years ago from a Winnebago dealer and was told it was ordered for a Winnebago Journey but was never picked up. My coach has a space for a electric chair( no not that one) breaker' but no breaker. I am assuming the coach wire harness does not have provisions to add the chair. Anyone installed this type of chair? If so, how did you wire it?
Thanks in advance

Bob & Donna
rmatt is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-08-2017, 08:19 PM   #2
Senior Member
Robi.1014's Avatar
Monaco Owners Club
Freightliner Owners Club
Join Date: Oct 2009
Location: Arlington, VA
Posts: 880
If the chair has all control switches mounted on the chair (Forward/Back; Tilt; Up/Down, etc.), then the chair probably needs only 12VDC fused at 20 amps and a ground. Feed this to the chair using 16-gauge wires.
Robi & Dale ---- Go Navy ----
2016 Winnie TOUR 42'
Tow: '08 Buick Lucerne
Robi.1014 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuse location for captains and co-captains chairs joseph gaw Newmar Owner's Forum 5 11-11-2015 01:49 PM
Removing the Captains Chair and putting in storage jschrubba Class C Motorhome Discussions 3 05-13-2013 05:35 PM
Flexsteel Captains Chair wobble pub1898 Class A Motorhome Discussions 3 05-11-2013 06:51 PM
Removing Captains chair in 1999 Storm minnieman Fleetwood Owner's Forum 2 10-14-2010 11:13 PM
04 Journey Captains chair install question OutBurger Winnebago Industries Owner's Forum 3 03-23-2010 08:53 PM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:09 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.