 |
01-19-2012, 05:45 PM
|
#1
|
|
Junior Member
Join Date: Dec 2011
Posts: 24
|
What is the best way and what liquids to use on old, faded exterior? Not expecting it to look new, but just better than it is.
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-19-2012, 07:05 PM
|
#2
|
|
Senior Member
Join Date: Jan 2011
Posts: 298
|
Do a search on redmax pro on this site
__________________
|
|
|
|
| |
|
01-20-2012, 04:44 AM
|
#3
|
|
Junior Member
Winnebago Owners Club
Join Date: Jul 2011
Location: Sebring, FL USA
Posts: 11
|
I had the same problem when we bought our latest coach. Tried everything that was out there. What worked best and looked the best after, was the use of 2000 grit wet/dry aluminum oxide paper. Wet sand it with the paper until the material stops coming off. You will know when it does as the surface becomes very slippery. Then after that step go over the surface with a polish. I used Nu Finish. It will look like a new coach when you're done. Much easier than using the chemical route. If you can find 2500 grit paper you could use it also. Probably the only place will be is a commercial body shop. I found the 2000 grit to be just fine and is easily available at auto stores.
__________________
Bob C
Sebring FL
2000 Winne 35U
|
|
|
|
| |
|
01-20-2012, 04:48 AM
|
#4
|
|
Senior Member
Newmar Owners Club Workhorse Chassis Owner
Join Date: Oct 2007
Location: Michigan
Posts: 2,593
|
You didn't mention what kind of finish you have. If it's a full body paint I wouldn't be using the RMP stuff. If it is full body paint a good rub out or wet sanding with a follow up of a good polish/wax is the way to go.
__________________
Steve & Sally / HiTee & Hudson Our Little Poms / Heidi & Houston Forever in our Hearts
04 NEWMAR MACA 3778 W22 / 05 PT Vert / Demco KAR KADDY SS
|
|
|
|
| |
|
01-20-2012, 06:45 PM
|
#5
|
|
Senior Member
Join Date: Dec 2006
Location: St. Augustine, FL
Posts: 1,639
|
The method outlined by RET SMOKY will work on a fiberglass body. But, to me, there's an even easier way to make fiberglass look like new.........go to a boat yard and buy some Aqua Buff 2000 buffing compound. Mix some Star Brite Teflon Polish in with it so that the buffing pad doesn't "grab". Spread a little on and use a med to high speed buffer and it will look like new. It's not easy but the results are well worth the effort.
If you have trouble finding Aqua Buff PM me for a seller.
__________________
KIX
2002 Ultimate Advantage 40J-Spartan-Cummins
2004 Jeep Rubicon 2004 Subaru Forester
|
|
|
|
| |
|
01-21-2012, 11:06 AM
|
#6
|
|
Senior Member
Winnebago Owners Club Ford Super Duty Owner
Join Date: Aug 2011
Location: Bartlett, TN
Posts: 403
|
Kix,
Thanks for the tip!!!!
__________________
 2003 Winne Adventurer, Ford F53 V-10. Toad:2009 Ford Focus, Stowmaster Towbar, Blue Ox Patriot brake system and Protect-a-Tow. Right is right even if no one is doing it; Wrong is wrong even if everyone is doing it--St Augustine of Hippo. Navy AD.
|
|
|
|
| |
|
01-22-2012, 08:02 AM
|
#7
|
|
Junior Member
Join Date: Dec 2011
Posts: 24
|
Thanks for the information. It is a fiberglass exterior and it is very faded. Also the widows and windshield have white streaks from the roof coating running down that was applied. I tried cleaning them but have not found anything yet that removes it.
__________________
|
|
|
|
| |
|
01-22-2012, 08:22 AM
|
#8
|
|
Member
Join Date: Dec 2007
Posts: 86
|
Quote:
Originally Posted by booyah
Thanks for the information. It is a fiberglass exterior and it is very faded. Also the widows and windshield have white streaks from the roof coating running down that was applied. I tried cleaning them but have not found anything yet that removes it.
|
Booyah, If you really want a great job that will last for years without doing over and over you need to look at Poliglo. http://www.myboatstore.com/proddetail.asp?prod=10%2DPGK One $ 65.00 kit will do your motorhome and it will come out like brand new. Three years ago I did our 1996 Bounder and it still looks great today. We purchased a 2003 Phaeton and I did it. It looks like a new coach. Once you poliglo, No waxing ever. A simple wash and the finish looks new. I listen to a lot of others and tried a lot of products before I found Poliglo I will NEVER use anything else again.
With your glass problem. I put a cut piece of cloth in my vibrating sander, apply tooth paste (not gel, paste) and sand the glass. The tooth paste will not harm the glass. It will cut off any impurities embeded in the glass and polish it to a super smooth surface.
Ron
__________________
|
|
|
|
| |
|
01-22-2012, 08:27 AM
|
#9
|
|
Senior Member
Workhorse Chassis Owner Fleetwood Owners Club
Join Date: Mar 2009
Posts: 560
|
I always used the line of 3M products that are found at Auto stores and RV dealers. Always shined my 90 Bounder real nice. Took a lot of work though but it always looked good for its age!
Regards,
RovinOn
__________________
LONG LONESOME HIGHWAY
Going down that long lonesome highway,Bound for the mountains and the plains
Michael Parks / Then Came Bronson - 1969
|
|
|
|
| |
|
01-22-2012, 09:50 AM
|
#10
|
|
Member
Join Date: Oct 2011
Posts: 84
|
You may want to look into Collinite's #920Fiberglass Boat Cleaner followed up with Collinite #885 Heavy Duty Fleetwax. It has worked well for us. Those boat people have seemed to figure it out.
__________________
|
|
|
|
| |
|
01-22-2012, 09:57 AM
|
#11
|
|
Senior Member
Join Date: Dec 2011
Posts: 141
|
Has anyone tried the product called "Shine On" if so please tell me how it works.
__________________
|
|
|
|
| |
|
01-22-2012, 04:55 PM
|
#12
|
|
Senior Member
Join Date: Dec 2006
Location: St. Augustine, FL
Posts: 1,639
|
Quote:
Originally Posted by booyah
Thanks for the information. It is a fiberglass exterior and it is very faded. Also the widows and windshield have white streaks from the roof coating running down that was applied. I tried cleaning them but have not found anything yet that removes it.
|
To clean the white residue from your windows use 0000 (4 ought) steel wool. Wipe as hard as you like. After going over the entire glass area then use a product like Windex but one without ammonia. No need to wash the windows before using the steel wool
__________________
KIX
2002 Ultimate Advantage 40J-Spartan-Cummins
2004 Jeep Rubicon 2004 Subaru Forester
|
|
|
|
| |
|
01-29-2012, 06:42 AM
|
#13
|
|
Junior Member
Join Date: Dec 2011
Posts: 24
|
I tried the steel wool on the windshield. Some of the streaks did come off but it was a lot of work. I am going to try the sander and toothpaste next.
__________________
|
|
|
|
| |
|
01-29-2012, 09:02 AM
|
#14
|
|
Senior Member
Join Date: Jan 2012
Posts: 163
|
Quote:
Originally Posted by Sidewinder
Booyah, If you really want a great job that will last for years without doing over and over you need to look at Poliglo. http://www.myboatstore.com/proddetail.asp?prod=10%2DPGK One $ 65.00 kit will do your motorhome and it will come out like brand new. Three years ago I did our 1996 Bounder and it still looks great today. We purchased a 2003 Phaeton and I did it. It looks like a new coach. Once you poliglo, No waxing ever. A simple wash and the finish looks new. I listen to a lot of others and tried a lot of products before I found Poliglo I will NEVER use anything else again.
With your glass problem. I put a cut piece of cloth in my vibrating sander, apply tooth paste (not gel, paste) and sand the glass. The tooth paste will not harm the glass. It will cut off any impurities embeded in the glass and polish it to a super smooth surface.
Ron
|
2X that. Made my 5th wheel look new!  Got it on Ebay for $59 for the whole kit.
__________________
|
|
|
|
| |
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|