Converter output

[Ron & Dee]

What is the output voltage on the converter?

My EMS always stays around 13.4 volts, is that the same voltage going to the batteries?

Thanks,

Ron

[wa8yxm]

That is in the range for Converter outputs yes.. As for "Is it the same voltage going to the batteries"

Only if every 12 volt device, fan, light, control system, etc, in your rig is OFF.

OR; if the ems has dedicated leads to the battery for voltage sense, which I doubt it does

I have 3 voltmeters here,, One is hooked to the battery by very heavy wire and if I have shore power it's not sucking anything so that reads actual battery voltage, none of them ever agree.