Destination Kwikee Slide out's

[Goggo]

I do have 08 Destination 39 D. Pusher and I am trying to locate the DigiSync Control Boxes for Kwikee slide out's, would any one perhaps know where are those located ? I assume there are two, one for each slider.
Looking forward to hear from you.

[Wayne M]

Try pulling the panel off in the electrical compartment. There should be two modules behind the panel. I'm thinking that it is the panel in front where the cable/sat connections are. That is what I was told by Winnebago technician for my 08 Destination. My passenger side slide was blinking 17 times (Only 15 in book) and technician said it was low voltage to rear actuator. I'm thinking that what ever it was fixed itself going down the highway, since it has worked for the last several weeks/stops. I was going to check the wiring to see if it was tight and/or switch the wiring to the opposite controller as an elimination process. I have not pulled the panel yet.

[Goggo]

Thank you Wayne, - I did contact Winnebago Industries and they indicated approximately the same location but your explanation is way more precise, thank you. I am having my unit in Victoria BC and now I am in Vancouver so when back this week i will see if it corrected on its own or will I need to open the panel. I do have also 17 flashes. Cheers.

Quote:

Originally Posted by Wayne M Try pulling the panel off in the electrical compartment. There should be two modules behind the panel. I'm thinking that it is the panel in front where the cable/sat connections are. That is what I was told by Winnebago technician for my 08 Destination. My passenger side slide was blinking 17 times (Only 15 in book) and technician said it was low voltage to rear actuator. I'm thinking that what ever it was fixed itself going down the highway, since it has worked for the last several weeks/stops. I was going to check the wiring to see if it was tight and/or switch the wiring to the opposite controller as an elimination process. I have not pulled the panel yet.

[Wayne M]

I'm really not sure that it is one of the modules. When I finally got it working I stopped using the slide lock. The only time you really need the slide lock is in strong side winds. My slide has worked every time since I stopped locking the slide. I'm thinking it is in one of the micro switches in the slide lock mechanism. When I'm at a comfortable locations and want to take the time I'll replace the micro switches. Should be a cheap fix.