Doghouse-Dash Sound/Heat Insulation Instalation

[Logthumper]

Last year for a winter project I undercoated the area above the front wheels and installed 3/8"� FiberMat/Foil Heat/Sound Insulation under the Doghouse Cover and inside the open area above the engine/under the dash. Never did feel like it was to loud in the Adventurer but was something to do. Did a great job in making for a quieter ride. Well I guess I'm running out of projects because the improvement prompted me to carry the idea on a little further.

I have now:

Installed 3/16"� neoprene sheets inside the hood/under the dash and then undercoated the whole area.

Installed 3/8"� Hardboard Insulation over the 3/8"� FiberMat/Foil Heat/Sound Insulation I installed last year inside the open area above the engine/under the dash and then spray coated with Silver High Heat Ceramic paint.

Installed 1/2" FiberMat/Foil Heat/Sound Insulation over the 3/8"� Insulation I installed last year under the Doghouse cover. "Pins"� were epoxied to the Doghouse Cover before Adhesive was applied and the insulation installed. The "Pins"� hold everything in place. Aluminum Foil Tape applied and then everything sprayed with Silver High Heat Ceramic paint.

This Adventurer is quiet.
Pics below

[Logthumper]

Last year for a winter project I undercoated the area above the front wheels and installed 3/8"� FiberMat/Foil Heat/Sound Insulation under the Doghouse Cover and inside the open area above the engine/under the dash. Never did feel like it was to loud in the Adventurer but was something to do. Did a great job in making for a quieter ride. Well I guess I'm running out of projects because the improvement prompted me to carry the idea on a little further.

I have now:

Installed 3/16"� neoprene sheets inside the hood/under the dash and then undercoated the whole area.

Installed 3/8"� Hardboard Insulation over the 3/8"� FiberMat/Foil Heat/Sound Insulation I installed last year inside the open area above the engine/under the dash and then spray coated with Silver High Heat Ceramic paint.

Installed 1/2" FiberMat/Foil Heat/Sound Insulation over the 3/8"� Insulation I installed last year under the Doghouse cover. "Pins"� were epoxied to the Doghouse Cover before Adhesive was applied and the insulation installed. The "Pins"� hold everything in place. Aluminum Foil Tape applied and then everything sprayed with Silver High Heat Ceramic paint.

This Adventurer is quiet.
Pics below