Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-31-2006, 02:49 PM   #41
Winnebago Camper
 
Join Date: Jan 2004
Location: Moreno Valley, CA
Posts: 15
Thanks for posting the picture Jim Bob. I have found nothing comparable on the internet. I'll try LaMesa RV tomorrow and if that dosen't work I'll give Lazy Days a call. The other ones sure won't work well on a Winnebago product.
__________________
Bob

2003 Horizion 39WD
Seabee is offline   Reply With Quote
Old 01-31-2006, 02:59 PM   #42
Administrator Emeritus
 
Join Date: Dec 2003
Location: Virginia Beach, VA
Posts: 1,319
Hey Bob,I am going to call Lazy Days parts first thing....will post what I find.
rebelsbeach is offline   Reply With Quote
Old 02-23-2006, 06:52 PM   #43
Member
 
Join Date: Jun 2001
Posts: 71
Love the photos of the Eternabond application. I see that you rolled it out along the gutter and used black tape to hold it. After that how did you get the backing off and still keep it taped?
Did you use the vinyl surface tape? I was not clear on how you met the gutter. Did you butt it to the top of the gutter or lap it down over? If you did lap it over, and it makes sense that you did, because you would not be covering the seam, is the gutter now made useless because the Eternabond causes the water to flow over it? Does any of this make sense?
One more question how is it that your roof is so shiny? Mine has rough spots where it is dull and no matter how much wax I use it is still rough and dull, even to the point that black spots show through here and there. It is like they ran our of fiberglass.
Thanks for your input.
no18yes is offline   Reply With Quote
Old 02-24-2006, 03:27 AM   #44
Winnebago Owner
 
Jim Bob's Avatar
 
Join Date: Jan 2006
Location: Georgia
Posts: 103
Hi no18yes
I rolled the Eternabond out like you said using black tape to hold it in place. The Eternabond stands up in the gutter,flat against the roof,covering the seam. I started at the front cap and worked only 3 or 4 inches at a time pulling the backing off as you go. Once you get the first few inches "stuck" in place just remove the black tape behind you and keep the Eternabond standing upright in the gutter and flat against roof.About half way through I had to "retape" as the slack builds up as you work, it stretches. The Eternabond does not restrict the water flow in the gutter. Also when finished I used Dicor self leveling calking to seal the seam at the end caps, running it right over the Eternabond.
Porduct information:
I ordered 2 rolls of Eternabond Roof Seal from Best Materials
Phone #1-800-474-7570
Web Site www.bestmaterials.com
Eternabond Roof Seal White 2"X 50' Roll
RSW-2-50 Sale Price $23.95

As for the clean roof, I bought the rig new in 2000 and keep it under shelter and use lots of Mothers Wax Thanks Jim Bob
__________________
2014 Itasca Meridian 36M
2014 Honda CRV
Jim Bob is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cutting board covers for sink sightseers Plumbing | Systems and Fixtures 7 01-02-2009 06:44 PM
RV Radio Cutting Out Pusherman Tech | Toys and Gear 16 11-25-2008 10:19 AM
cutting hole in roof oldpa General Maintenance and Repair 15 11-30-2007 05:04 AM

» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 08:31 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.