Has anyone had the slide shoe glides replaced out of warranty?

[LK23]

Has anyone had their slide shoes glides (white plastic) replaced? If so, how much did it cost?

[LK23]

Has anyone had their slide shoes glides (white plastic) replaced? If so, how much did it cost?

[Randy Chesnutt]

I have replaced mine myself. There is one screw and two dowel pins that holds the bottom guide in. I jacked up the slide till the arm just touch the top guide. My guide was broke in half, when I removed the screw I was able to remove the front half and took a screw driver and pushed the dowel pin out and remove the other half. Put the new guide in and tapped the dowel pins back in and then the screw. Let the jack down and I was ready to go.It was not that hard.I got the guide From HWH. They sent a complete set of guides for the slide. Now I got Spares. It will break again I know. There is alot of wieght on those guides.

[LK23]

Randy, Here is a photo of the slide shoe guide I am concerned about. Is this the same shoe you replaced yourself?

[Randy Chesnutt]

NO the one you have is different. You might Email Hwh and get a drawning on it. I can see the cracks in it. Sorry

[Frank (Wires) & Jean]

I had it replaced at HWH -they removed both slides arms and replaced all the plastic parts. It took 7 hours, at times 3 factory workers worked on it. This was a warrenty repair. The factory said the adjusted width was to wide - -so check with HWH


\\\<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by LK23:
Has anyone had their slide shoes glides (white plastic) replaced? If so, how much did it cost? </div></BLOCKQUOTE>