|
My steps would not retract fully, unless I "helped" them by hand. In addition to lubing, I drilled a hole in the frame & put the ground wire on a new nut/bolt in that hole. Prior to drilling the new hole, I cleaned up the original nut/bolt but the wire lead was too corroded. So had to cut the wire back, put on a new lead, then attached it to new nut/bolt on frame. Steps now retract fully.
Thudman
__________________
03 Adventurer 38G, W22, 22.5 Whls
Koni FSD's, TracBar rear, SteerSafe, 50A SurgeGuard, Eternabond; 2012 Honda CRV AWD
|