How In The World Do You Reset The Trip Odometer Ellipse/Tour

[Desiday]

How in the world do you reset the trip odometer, fuel used, and time settings on the info center above the speedometer and tach? Every time I try to move the scrolling button, it says that reset is not available...UGGG!

[Ranger Smith]

You need to change the highlighted parameter with the up/down arrow and then hold the arrow right for 3 seconds.

[bridluz]

Originally Posted by Ranger Smith

You need to change the highlighted parameter with the up/down arrow and then hold the arrow right for 3 seconds.

That works for me on fuel consumption, etc. BUT, it will not allow me to change the time or date. Strange.

There are three lines of data. Is there a way to change the 3 so I can pick and choose what is on the screen? I ask because my old Scan Guage D allowed that. Thanks.

[chuckftboy]

If I can remember correctly, you can only change the date and time in one of the 3 setup screens One is maintenance another is diagnostics and then there is a third setup where you can change the format of each line and things like time and date, plus how they are displayed.
Wish I could be more help but the coach I have now has a digital dash and my display is totally different so I have nothing to go back and look at to give better advice.

[toddb]

Originally Posted by Desiday

How in the world do you reset the trip odometer, fuel used, and time settings on the info center above the speedometer and tach? Every time I try to move the scrolling button, it says that reset is not available...UGGG!

That part of the coach is Freightliner. Changing the display and resets are in the Frieghtliner specific manual. Might ask in the engine/chassis manufacturer part of this site. Maybe this is elementary and I'm missing something, but there is a square toggle on drivers left near the gear select. Pushing it forward/aft scrolls thru about 10 different lines, toggling it right (?) scrolls thru various parameters on each line you can look at. Toggling it left (?) triggers the reset question *if* all the parameters on that line are re-settable.