Keyless Entry DOA?

[Olive]

Originally Posted by Gary D

I have had issues with the FOB off and on. I have found that the most common problem is with the FOB itself. I take the FOB apart and clean the contacts between the printed circuit board and the rubber like pad under the FOB keys. To take the FOB apart remove the two small screws and lift up the printed circuit carefully with a small screwdriver. It is held in place with a small rubber grommet over a small plastic post. Remove the battery.You then can remove the small contact pad and clean the circuit board very easily. I use isopropyl alcohol pads to do this.

Reassemble in reverse.

This has brought back my FOB more than once.

Gary

Thanks Gary! I have one FOB that hasn't worked for a while, cleaned it per your instructions and it is working again. The one I have been using has been eating batteries like candy the last couple months so hopefully this cleaning will stop that also.

[ScottTuma]

I bought a used 07 Journey with only one keyless entry fab. Anybody know where I might purchase another one. I understand if you find one it can be programed to work with your coach.
Thanks
Scott

[Ray,IN]

Originally Posted by ScottTuma

I bought a used 07 Journey with only one keyless entry fab. Anybody know where I might purchase another one. I understand if you find one it can be programed to work with your coach.
Thanks
Scott

Any Winnebago dealers parts department will order you one. Found that out when DW wanted one for her.
Now, I have a question. Where is the receiver unit where you remove the yellow sticker and push the button to begin the re-programming? The W service center wants $125/hr to program the new fob.