|
I agree, the jacks alarm sounder is a bit obnoxious. HWH used to provide Winnebago an alarm that "dinged", but Winnebago doesn't order them anymore. They're still available for about $ 30. What I did was add a latching relay circuit with a push button on the dash. When the alarm turns on, I push the button and it disables the alarm. When the ignition switch is turned off, the relay resets allowing the alarm to operate again. The operation of the dash light is unchanged. If you are handy, I can send you a schematic and parts list. A simpler solution would be to place tape over the front of the sounder to mute it some or add a switch in series with the sounder , but then you'd have to remember to turn it back on. You may need to dig to find the sounder, but it should be mounted to the firewall. It will have a Red and Black wire going to it. the Red is switched +12VDC and the Black is the control from the HWH jacks panel.
__________________
|