My clock keeps falling

[99Adven]

I have a 99 Adventurer and the clock mount is above the exit/entrance door. There is an opening about 6 inches wide with 2 1x4 pieces of wood mounted across the opening setting about 1 -2 inches deep. So it's hard to get into when working to put a clock into it. The last clock was velcroed to these two boards with several layers of velcro. Seems this is a constant problem. But the velcro won't hold and I've lost 2 clocks so far after dropping to the floor while driving. I'm looking for a little more of a permanent fix. Anyone gone through this or have an idea on a fix. I'm against the wall on this one. Thanks.

[mustang652]

Not exactly knowing or seeing what your mounting place is or a Winne owner but I'll pass on what we had in our first RV. I noticed two decorator screws through the frame of the clock. Sure enough, that's what held the clock on the wall. Had to remove screws to chang battery.

[wa8yxm]

Think about mirror mounts... I ave a clock in my "Radio Room" which is mounted by simply drilling a large enough hole in the wall (like 3", I used a hole saw) and shoving it in, I then used 3 mirror mounting clips to hold it in place. Spaced 120 dreeges around the face (2 six and 10 O'clock positions)

[99Adven]

Thanks. The hole is already there so all I have to do is put the mirror clips on. Great idea. Thanks

[Mr_D]

I just screwed a fairly large screw into the luan backed wall and used velcro to keep it from moving. Have done that on two clocks and after 9 years they're still there.