Norcold Refrigerator problem

[Ron and Patti]

We are out at the camp ground and our refrigerator stopped working it is flashing a (no code) on electric and propane. I jumped the 15th pin to the power board and grounded it out for 15 seconds did not hear a clicking sound with would indicate that the control panel is reset, so I had to use a jumper wire to the solenoid gas valve wire to keep the refrigerator running it is now running on 100% propane.I know this is a quick fix but not real safe with me by passing the gas valve. But I had to get the refrigerator up and running. It is the holiday weekend and I would like to try to fix this problem before the end of this weekend so I can get parts. Could it be possable that the control panel board could be bad, Any other suggestions would be appriciated. Ron

[Ron and Patti]

We are out at the camp ground and our refrigerator stopped working it is flashing a (no code) on electric and propane. I jumped the 15th pin to the power board and grounded it out for 15 seconds did not hear a clicking sound with would indicate that the control panel is reset, so I had to use a jumper wire to the solenoid gas valve wire to keep the refrigerator running it is now running on 100% propane.I know this is a quick fix but not real safe with me by passing the gas valve. But I had to get the refrigerator up and running. It is the holiday weekend and I would like to try to fix this problem before the end of this weekend so I can get parts. Could it be possable that the control panel board could be bad, Any other suggestions would be appriciated. Ron

[tomsm]

Ron,

If it's the 4 door Norcold, I have a PDF of the service manual. From what you said you've done though, it sounds like you already have the manual. Let me know if you want it emailed to you - it's about 5.4mb...

[Ron and Patti]

I have the sevice manual we have model 842IM norcord thats how I found out on how to reset the 15th pin but it didnt work the manual also states it can olny be jump one time after that you need to call a sevice teck.we are the second owners of the rig and have know ideas if it was done before if I cant fix it myself I guess I will take it to the dealer after the holiday.its running reel good after I jumped the gas valve I will just keep my eye on it Ron

[tomsm]

Ron - I thought it sounded like you had a manual. My manual for the 1200IM mentions a couple of fuses, but I assume you've already checked those. Since you lost it on both AC and LP, it sure sounds like the control board - about the only thing in common with the 2 power sources. Good luck...