OBDll connector?

[captjsr]

Does a 2000 winnebago Brave have a OBDll connector? If so where do I find it?
Thanks

[sirpurrcival]

Some more info might help.

My 1999 Gasser on a Ford Chassis has it. It is attached at the steering column.

[captjsr]

2000 winnebago Brave, gas, on a Workhorse Chassis, with a 454 7.4L engine.

[edgray]

Originally Posted by captjsr

2000 winnebago Brave, gas, on a Workhorse Chassis, with a 454 7.4L engine.

I'm assuming you have a P32 chassis. I'm not SURE where they mounted the OBDII on those, but on the W series chassis it is between the PB release mechanism and the steering column, just under the edge of the dash. It is a small trapezoid-shaped plug and may have a dust cover preventing you from seeing the double row of pin sockets.

[TeJay]

Most of those ODBII connectors are located in and around the steering column around the drivers knees. They are used by the technicians to access the data stream of information going from all sensors to the ECM. Therefore the location has to be somewhat standard so they can be found. Sometimes they have a cover or something obscuring a complete view of the connector but since the last poster gave you a description it should be found.

TeJay

[captjsr]

Yeah, I found it. It was loose and was tucked behind a shield for the steering column.
Thanks for keeping me looking.