RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Winnebago Industries Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 12-12-2007, 10:18 AM   #1
Member
 
gtcoatie's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 70
I have lossened the bolt at the back of the engine cover, but it is clear it is secured at the dash by some means. I can find nothing in the literature, and I can't really tell by looking under the cover. I don't want to "rip it off", so I figured I would ask someone here that might help me understand how it is secured at the dash, and what I have to do to get it off.

Thanks
__________________

gtcoatie is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-12-2007, 10:38 AM   #2
Senior Member
 
tomsm's Avatar
 
Winnebago Owners Club
Join Date: Jun 2004
Location: SW Florida
Posts: 1,015
Here's a link to a recent thread on this subject. Good luck finding the hidden screws...
__________________

__________________
Tom
'04 Journey 36G - Cat C7
'04 Honda CR-V
tomsm is offline   Reply With Quote
Old 12-13-2007, 02:26 AM   #3
Member
 
Join Date: Jun 2006
Location: Pollock Pines, CA
Posts: 45
I have a 2006 Adventurer and to remove mine I have the allen bolt/screw in the rear middle and two philips head screws in the front one on each side. The phillips screws are about an inch up from the floor and an inch back from where it mates to the front. I had to feel around with my fingers pushing into the carpet to find these. To make it worse one was installed under the carpet and the other was through the carpet which made it easier to find. After you find the screws and remove them just pull the cover to the rear of the coach maybe an inch or two and lift off. Good luck...
__________________
2006 Adventurer 37B

Workhorse W-24
Rock-Rocker is offline   Reply With Quote
Old 12-13-2007, 02:28 AM   #4
Registered User
 
Join Date: Jun 2005
Posts: 1,566
No need to reinstall the front sheet metal screws either....there is a front metal brack that keeps the front down tight.
FrontRangeRVer is offline   Reply With Quote
Old 12-13-2007, 03:02 AM   #5
Member
 
gtcoatie's Avatar
 
Join Date: Sep 2007
Location: Georgia
Posts: 70
I found and removed them last night....thanks
gtcoatie is offline   Reply With Quote
Old 01-31-2009, 01:09 PM   #6
Junior Member
 
Join Date: Jan 2009
Location: Austin TX
Posts: 1
Thanks, guys -
This works for a 2004 Sightseer, also. Could it be standard on Workhorse models?
I should note that the right screw was driven at about a 20-degree angle toward the front of the coach.

THanks again. Pauldy
__________________

Pauldy is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cover for Adventurer 38R gtcoatie Winnebago Industries Owner's Forum 2 01-03-2008 01:50 PM
Cover for 2005 Adventurer 38R? gtcoatie Winnebago Industries Owner's Forum 2 12-30-2007 07:20 AM
Engine Cover Removal Geechee Winnebago Industries Owner's Forum 20 12-10-2007 08:13 AM
Removing the doghouse cover.... jasonm Winnebago Industries Owner's Forum 2 03-11-2007 08:10 AM
Engine Cover janny Winnebago Industries Owner's Forum 10 11-14-2005 06:38 AM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:42 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.