Sagging slide

[toneumanns]

I am starting to notice that my baggage style doors are hitting the lower ledge of my full body slide when opened. Would appreciate any advice on which rollers to adjust to raise the height of the slide. When the slide is retracted all the paint lines line up correctly.

[bobmac]

I had the same problem on my Journey. Carefully inspect the bolts supporting the slide rollers to insure that they haven't fractured. Make sure you look very closely using a flashlight - took me sometime to actually see the crack. Mine cracked just below the top support. The fix is to weld the bolt back together and readjust the height. Was a 15 minute fix by Winnebago at the factory last summer - that tells me it is a common issue.
Good luck,
Bob

[edgray]

You didn't say which floor plan you have, but I think you'll find this thread helpful: http://www.irv2.com/forums/f101/full...se-135654.html

Take a look at the pictures using the link in post # 9.

Hope it helps, Ed