SCS/Frigette Keyless Entry Main Module

[BucknJeff]

Has apparently, not unlike the Company that made it, died.

Neither fob will work, nor will it go into "enroll mode" as described in other posts and in the directions.

It has power to it, but no response.

Anyone know what makes these fail, or where to get a replacement or different product to replace it?

Thanks.

[jimjr]

Mine just "died" yesterday... Keyless entry system, basement air, Thanks Winnebago!

[Jerry J]

No replacement yet I believe. Once my keypad quit and I disconnected and reconnected it after a short wait and it resumed working. It seems mine needs to be reprogrammed with the remotes every once in a while. It still works but how long is any ones guess.

[Boris and Natasha]

When we were in Forest City in July this was on our list of warranty repairs. Winnie replaced the module and fobs with something from another manufacturer. Works great!

[BucknJeff]

Quote:

Originally Posted by Boris and Natasha When we were in Forest City in July this was on our list of warranty repairs. Winnie replaced the module and fobs with something from another manufacturer. Works great!

(Moose and Squirrel must die?)

Thanks! I found a few other manufacturers on line as well.

Do you know the brand they used and if it plugged in or if they had to re-wire the harness for it?

Thanks!

[Navy Flier]

This is fast becoming the "day/night shade issue" of 2010. After mine died I decided to use the tried and true key, they do not seem to fail or need to be reprogrammed.
If someone comes up with a good replacement brand it would benefit all of us if it was broadcast on this site.

[dengraham]

Winnebago is now using TriMark Corp remote system in the 2010 models. I met a person at GNR that had them install the system in his 08 Vectra. I think he said it was around $375. I don't know about the wiring but you could contact TriMark. 800-447-0343 or trimarkcorp.com
Let us know what you find out. Thanks

[Boris and Natasha]

Yep. Our new system is TriMark. Don't know how or exactly what they replaced. It just works!

[Jerry J]

I forgot, Diane reminded me that we did have the keypad replaced April 27, 10 when we were at the factory. It does have a beep when pushing the buttons that the original did not. Since then we have had to reset the remotes a couple of times. I don't know if it is a different brand, but looks like the original keypad and we have the same remotes as before.
The Part Number is 151458-02-000, do you have the Part Number for yours?

Quote:

Originally Posted by Boris and Natasha Yep. Our new system is TriMark. Don't know how or exactly what they replaced. It just works!

[BucknJeff]

Thanks all !!

The TriMark is the one I found online, as well as one from Essex Electronics.

I'll start sourcing the TriMark one, configured for entry door and cargo door on the remote key fobs.

I'll let you all know if/how it works out.

Thanks again!

[rgvtexan]

On our 04 Horizon QD I replaced the stock unit with an "ASTRA 50" ~$40
any good elect tech or alarm system installer should be able to wire it for you. I have some drawings of how I wired it. In 6 months still works great for the main door and the compartments. Also has some limited alarm features and can be wired for starter lockout. Auto locks doors with ING. key on.

Manual here http://www.scytek.net/manuals/astra/a50.pdf

[cbeierl]

Quote:

Originally Posted by rgvtexan On our 04 Horizon QD I replaced the stock unit with an "ASTRA 50" ~$40 any good elect tech or alarm system installer should be able to wire it for you. I have some drawings of how I wired it. In 6 months still works great for the main door and the compartments. Also has some limited alarm features and can be wired for starter lockout. Auto locks doors with ING. key on. Manual here http://www.scytek.net/manuals/astra/a50.pdf

Corrected link: http://www.scytek.net/manuals/astra/a50.pdf

[rgvtexan]

Thanks!

[BucknJeff]

Found a seller on Ebay with a few of the TriMark kits for around $40, so I took the plunge. The remotes may not have the right characters on the remote buttons, but I can learn!

It's going to require rewiring the harnesses that connects it, but thats not a big deal.

I'll let you all know what I learn.

Now to go and replace the extend solenoid that malfunctions. After that, I can put the new inducer blower in the boiler (we have hydronic heat/hot water) and then try to figure out why the King Dome won't play nice anymore.

Next week I get to do the coolant tank update, and replace the original cranking batteries (They're still working fine, but at more than 7 years old, they WILL die on my upcoming cross-country trip). Oh, and install the echo-charge too, so I don't have to connect the little smart charger each time I park (though the charger has prolonged their life, I am convinced).

Just noticed that there is a 1 inch hole in the side of my sewer hose. Better get to that one first!

It's never boring around here.