The shower fixture in my 30T is loose. Probably the wing nuts need tightening on the back. So, I looked in the adjacent closet for an access panel, none there. Wondering if other 30T's have a panel and if it provides direct access to the fixture. I hate to cut a hole and find another obstruction. Any info is appreciated.
Ghutch.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
ghutch, don't see any wing nuts in the drawings. The inside shower control is the same as the one used in the wet bay. Take a look at the back of the one in the wet bay.
I think you remove the small panel holding the handles to get to the back.
__________________
Grant & Pat
2014 Adventurer 35P
2021 Ford Bronco OBX
ours may be different but if you look at the faucet you will see it is mounted in a small panel just guessing 4 by 6 inches. There are 4 plastic press down screws holding the panel. They just pry/pop up. The faucet is mounted to that on the backside and connected to the plumbing by flexible hose.
__________________
2007 Itasca Sunrise 35L W22 Chassis TigerTrak ScanGaugeII
Blue Ox tow bar - Brake Buddy
2013 Equinox
I have the problem fixed. Although I hate working with caulk, I removed the front panel the fixture is mounted to, and found enough slack to pull it out and tighten the wing nuts. Reinstalled, re-caulked and its tight and looks original. Thanks Indy Itasca.
Linear Mode
