 |
|
09-21-2008, 07:24 PM
|
#1
|
|
Senior Member
Join Date: Mar 2005
Location: Northern Oklahoma
Posts: 1,518
|
Has anyone had any problem with the little plastic stud mounted to the side of the shower wall that holds the shower head end of the hose breaking off due to weight of the shower head? Did all that make any sense? Can that screw at the end of the hose be tightened without any problems so that the position of the shower head can be controlled to spray in a certain direction when its hanging back on that little plastic stud? So you can use it like your home shower.
That little plastic stud always seemed to be a very weak spot considering the weight of the shower head Winnebago is now using instead of that little white one on the outside shower hose.
Wagonmaster2
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
09-21-2008, 07:24 PM
|
#2
|
|
Senior Member
Join Date: Mar 2005
Location: Northern Oklahoma
Posts: 1,518
|
Has anyone had any problem with the little plastic stud mounted to the side of the shower wall that holds the shower head end of the hose breaking off due to weight of the shower head? Did all that make any sense? Can that screw at the end of the hose be tightened without any problems so that the position of the shower head can be controlled to spray in a certain direction when its hanging back on that little plastic stud? So you can use it like your home shower.
That little plastic stud always seemed to be a very weak spot considering the weight of the shower head Winnebago is now using instead of that little white one on the outside shower hose.
Wagonmaster2
__________________
|
|
|
|
| |
|
09-22-2008, 01:39 AM
|
#3
|
|
Senior Member
Workhorse Chassis Owner
Join Date: Feb 2000
Location: Oakhurst, N.J.
Posts: 1,481
|
I hope you discover a solution for this irritating problem..
|
|
|
|
| |
|
09-22-2008, 02:52 AM
|
#4
|
|
Senior Member
Join Date: Dec 2005
Posts: 458
|
When we travel we put the shower head on the floor of the shower wrapped in a towel. All that bouncing can't be good for the little plastic post.
__________________
Doug and Cassi
'05 Meridian 36G
|
|
|
|
| |
|
09-22-2008, 03:14 AM
|
#5
|
|
Senior Member
Tiffin Owners Club Appalachian Campers Fleetwood Owners Club
Join Date: Jul 2007
Location: Titusville, FL
Posts: 616
|
Funny, I was just thinking about this yesterday. We have not had a problem with the stud breaking with the weight on it and we leave it there all the time. I do tighten the screw on the shower head from time to time, no problem. With two people of dissimilar heights it does get moved often.
__________________
'12 Heartland Landmark & '05 Jamboree 31M
"Home is where we park it" SEMPER FI
|
|
|
|
| |
|
09-22-2008, 03:46 AM
|
#6
|
|
Junior Member
Join Date: Dec 2006
Location: Waretown, NJ
Posts: 23
|
Where can you buy a replacement shower head holder, mine is broken
__________________
|
|
|
|
| |
|
09-22-2008, 06:53 AM
|
#7
|
|
Senior Member
Freightliner Owners Club
Join Date: Aug 2008
Location: New Jersey
Posts: 1,216
|
I never broke the knob that holds the shower head to the wall, but I did solve the problem where the shower heads keeps 'flopping down' instead of keeping the spray where you want it.
I unscrewed the screw and nut at the base of the head and inserted a very thin nylon washer (available at Home Depot). You then put everything back together. The nylon washer adds enough friction to keep the shower head pointed in the direction you set it.
__________________
Tom and Katharine
'07 Winnebago Tour 40TD, 400hp Cummins
RVing for 14 years with three boys
|
|
|
|
| |
|
09-22-2008, 07:08 AM
|
#8
|
|
Senior Member
Join Date: Mar 2007
Location: Northridge, Ca
Posts: 242
|
Mine hasn't broken, but it can no longer be tightened. Thus, the shower always points downward. I take out the screw on occasion and put a layer of tape inside to increase the pressure, but that is a real temporary fix. If a replacement is posted, I'm interest.
__________________
|
|
|
|
| |
|
09-22-2008, 05:19 PM
|
#9
|
|
Senior Member
Join Date: Nov 2004
Location: Mesquite, NV
Posts: 622
|
Neither one of ours has broken (43+ K). We keep the shower head on the lower stud when traveling.
I'm going to try the nylon washer when I get a chance. Thanks for the tip.
__________________
Dan & Sharon & Kasey (Our Yorkie Puppy (7 Yrs Old)) Mesquite NV
2012 Journey 36M
|
|
|
|
| |
|
09-22-2008, 05:40 PM
|
#10
|
|
Senior Member
Join Date: Mar 2005
Location: Northern Oklahoma
Posts: 1,518
|
Johnxx -- I've wondered about that myself. I don't know if this is a Winnebago part or whoever furnishes the shower stall. Somewhere in all the literature furnished with our coach, it seems I remember seeing something about the company involved with the shower stall, glass, or door. Surely this small insignificant little piece shouldn't be that hard to replace. If anyone does find a source, please let us all know.
Wagonmaster2
2004 Meridian 36G
__________________
|
|
|
|
| |
|
09-22-2008, 08:31 PM
|
#11
|
|
Senior Member
Join Date: May 2007
Posts: 202
|
It's an Alsons part.
If you need the stud, I think I found it somewhere online or from the Alsons website. I'll hunt around for it and post later if I find it.
We've bought the shower head swivel connector from Home Depot online because our Winnebago dealer told us we couldn't order just the plastic part that hooks into the stud. We had to order to whole swivel connector so we ordered it from Home Depot's website and saved a few bucks:
http://www.homedepot.com/webapp/wcs/stores/servlet/Prod...0003+500850+10401001
__________________
~~amanda
'07 Itasca Meridian, 34' 9"
|
|
|
|
| |
|
09-23-2008, 08:22 AM
|
#14
|
|
Junior Member
Join Date: Dec 2006
Location: Waretown, NJ
Posts: 23
|
Wagonmaster2, Thanks for the info on the shower head holder.
__________________
|
|
|
|
| |
|
 |
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|