Slide Help.

[Tcloud7]

We Have a 1999 Winne DP 35ft. Last weekend I put the slide in ,jacks up,air bags full and ready to roll. This weekend I go out and see the slide is out maybe 2 inchs. I checked the bleed valves and they are good and tight.

Any Ideas??????????

Thanks

[Tcloud7]

We Have a 1999 Winne DP 35ft. Last weekend I put the slide in ,jacks up,air bags full and ready to roll. This weekend I go out and see the slide is out maybe 2 inchs. I checked the bleed valves and they are good and tight.

Any Ideas??????????

Thanks

[Tcloud7]

HWH Sucks won't even call back. It been tow weeks and I have called them 3 times.

[troth]

The primary cause of the HWH hydraulics losing pressure (i.e.- jacks dropping or slides moving overnight) is dirt/contamination in the control solenoid (keeping the needle valve from seating). They are easy to remove/disassemble and clean. You will need to know which solenoid to tackle; if in doubt, call HWH and stay on the line (I too experienced delays getting a live person, but they do answer).

[Suncruiser Ron]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Tcloud7:
HWH Sucks won't even call back. It been tow weeks and I have called them 3 times. </div></BLOCKQUOTE>

I have had great success by emailing them rather than trying on the phone. They ALWAYS call back within hours