slide is creeping in

[Phelpo]

I checked and searched but could not find anything about
this topic. Pass side lg slide is creaping in slowly.

What the heck could cause that?

Phelpo

2004 Vectra AD

[smlranger]

Most common cause of slide creep (in or out) is a failing solenoid at the manifold. Since your slide/s are held in position by hydraulic pressure, any leak could cause creep. If you have any obvious fluid leaks at a hose fitting, that might be the problem. If the solenoid that holds the slide in the outward position is failing, it will let the slide creep in.

Another possible cause is an internal leak in the hydraulic cylinder (ram) that pushes/pulls the slide.

If you are able to do some troubleshooting, suggest you call HWH and one of the techs will walk you through some tests to help diagnose the problem.

[tiggertoo]

My slide was creeping in and I called HWH and was told that it was the solenoid that controls the slide moving out that was leaking. I ordered a solenoid from HWH, replaced it and it doesn't creep any more. Hope this helps.

[Phelpo]

thanks to all..it is only $$$$$$$$$$$$$$

Phelpo

[NO1RAINH20]

Also check good for fluid leaks on the lines and fittings