Slide Problem

[Velroc]

My 2012 Win Vista-T has a problem with the Drivers side front slider.

Last month it failed to retract, I followed the instructions and took off the control panel and pushed the over ride button. The I was able retract it as the in & out buttons each operate a motor.

I have found if don't extend the slide all the way it works fine. I assume their is a stop that needs adjusting? or is their a photo cell or something.

Any suggestions would be appreciated.

Bob

[Shuffster]

You might try resetting the stops. See the link. Your 2012 model will have the updated control, just read the resetting instructions on the bottom. http://support.powergearus.com/techdocs/82-S0502.pdf

Good luck, my 2010 30w has the same drivers slide as yours, and it occasionally faults.