Slide Sticking

[Bug512]

Hello, our living room slide sticks when trying to extend. It has done this on our last two trips, I can get it to extend if I extend then retract a little.
And yes the rig is leveled.

Any ideas in what to look for?

Thanks

[Dave and Jaime]

Assuming you have hydraulic slides, one place to start is to look carefully all around for any evidence of leaks. Also, check the fluid level to make sure you are not low on fluids.

[num1dgh]

Does it stick whether the motor is running or not? We had to keep our motor running while retracting or extending the bigger living room slide.

[Bug512]

Thanks for the quick replies !

The top part of the slide sticks. I keep the engine running when operating the slides or levelers. I want to ensure full voltage then the pump and solenoids are being used.

Levels on my hydraulics are fine alone with how everything sounds.

I think I need to look where (if any) lubrication points are for the slide.

BTW the bedroom slide works fine.

[DAN L]

assuming your slides and jacks are hwh, call frank at 800.321.3494.