Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Winnebago Industries Owner's Forum
Click Here to Login
Register FilesVendors Registry Blogs FAQ Community Calendar Today's Posts Search Log in
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 01-01-2005, 10:57 AM   #1
Junior Member
 
Join Date: Dec 2001
Location: Gilbertsville, PA USA
Posts: 15
The slide stop on the closed end of my rear slide had come undone and was laying on the floor. Any idea how tight the rear slide should be closed. I have a Journey and the top seems to hit and then the bottom pulls in, is this correct? It seems that the bottom has another 3/8 to 1/2 after the top hits before the bottom is tight. I can't get any info from owner relations concerning this adjustment.

Thanks
Steve
Demoman is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-01-2005, 10:57 AM   #2
Junior Member
 
Join Date: Dec 2001
Location: Gilbertsville, PA USA
Posts: 15
The slide stop on the closed end of my rear slide had come undone and was laying on the floor. Any idea how tight the rear slide should be closed. I have a Journey and the top seems to hit and then the bottom pulls in, is this correct? It seems that the bottom has another 3/8 to 1/2 after the top hits before the bottom is tight. I can't get any info from owner relations concerning this adjustment.

Thanks
Steve
Demoman is offline   Reply With Quote
Old 01-01-2005, 04:28 PM   #3
Senior Member
 
Join Date: Oct 2003
Posts: 358
That's the way mine retracts....top first then bottom.....RKL
RKL2 is offline   Reply With Quote
Old 01-02-2005, 12:43 AM   #4
Senior Member
 
UPS 34's Avatar
 
Monaco Owners Club
Join Date: Jul 2004
Location: Frederick Md.
Posts: 453
Mine is the same.
__________________
2007 Monaco Camelot 40 PAQ
2007 JK 4Door Jeep
UPS 34 is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide stop rod Dav5942 Newmar Owner's Forum 11 04-11-2007 06:28 PM
Onan Genset slide out motor won't stop David Selby MH-General Discussions & Problems 8 01-06-2007 01:00 AM
Stop over in LA? It's A Good Life!! Camping Locations, Plans & Trip Reports 3 11-09-2006 01:16 PM
Do not even stop at this CG.......... araucano Camping Locations, Plans & Trip Reports 2 05-30-2005 04:04 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 03:55 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.