Toad electrical hookup problems

[jor]

I have a 2005 Vectra 40AD and while identifing the contact post on on the Vectra toad electrical socket I accidently crossed two post and it sounded like a fuse blowing. All the lights still work on the Vectra but there is no power to the right turn post on the tow socket on the Vectra. I went ahead and finished the connections and all the lights work correctly on the toad but the right turn signal. There is no wiring diagrams and of course it is a weekend and I can not call anyone. Have you any suggestions? Thanks for any thoughts,,,,,jor

[jor]

I have a 2005 Vectra 40AD and while identifing the contact post on on the Vectra toad electrical socket I accidently crossed two post and it sounded like a fuse blowing. All the lights still work on the Vectra but there is no power to the right turn post on the tow socket on the Vectra. I went ahead and finished the connections and all the lights work correctly on the toad but the right turn signal. There is no wiring diagrams and of course it is a weekend and I can not call anyone. Have you any suggestions? Thanks for any thoughts,,,,,jor

[LK23]

Jor,

You can find Winnebago electrical diagrams on the Winnebago web site. I am not sure if they have the diagram you need but it is worth a try.

[Tom Williams]

I had the samething happen and I did blow a fuse.
I have a 03 JOurney and I found my blown fuse in the front end that you access from the outside. There is a box with relays and fuse panels. I think mine was a 10 amp mini fuse.
You might find where your fuse panel is located by looking in your owners manual or call Win. Custome Service and I am sure they can help you.