Winnebago Industries Electrical & Plumbing Diagrams & Parts Catalogs

[chiliprepper]

Most helpful! Thank you

[Freebird1958]

Originally Posted by Sammie

Try Here!

WebCD Web Service Parts Catalog

I have Windows 8.1 on my laptop. I try to open the 3D viewer with no luck can anyone help me on this problem.

[Kaweh]

Hi there found you through another post. Do you know where to obtain the p30 chassis diagram? The GM diagram for the chassis that might have the ECM wiring diagram. Thanks a million. info@kaweh.com

[NanaBrock]

1994 Vectra 33RQ gas
Where in the heck is the converter located? I've looked through everything.
I'm plugged into 50 AMP. Batteries are good but not charging. Nothing 12V is working

[Kaweh]

I already checked these pages and site. There is no ECM wiring diagram.

[NukeRef]

Originally Posted by Freebird1958

I have Windows 8.1 on my laptop. I try to open the 3D viewer with no luck can anyone help me on this problem.

I have the same problem. Any help out there? I was told to call Winnebago IT for support, but haven't done so yet. I'm hoping to see someone face-to-face at the GNR this summer.

[Nomad Mike]

Originally Posted by Freebird1958

I have Windows 8.1 on my laptop. I try to open the 3D viewer with no luck can anyone help me on this problem.

Originally Posted by NukeRef

I have the same problem. Any help out there? I was told to call Winnebago IT for support, but haven't done so yet. I'm hoping to see someone face-to-face at the GNR this summer.

Do you meet the system requirements? Make not that you must have MS IE 32 bit version:

Software
 Operating systems supported:
o Microsoft Windows XP Service Pack 3 (SP3) (32-bit)
o Microsoft Windows Vista Service Pack 2 (SP2) (32-bit, 64-bit)
o Microsoft Windows 7 (32-bit, 64-bit)
They list Win 8 on the main page
 Web browser: Microsoft Internet Explorer 8.0 or a later version (32 bit version only)
NOTE: Firefox is NOT supported
 Microsoft DirectX® End-User Runtime 9.0c or a later version.
o Help Installing DirectX
 http://support.microsoft.com/kb/179113
 Cortona3D Viewer 7.0 or a later version.
 Rapid2DViewer 1.0 or a later version (for displaying the 2D graphics).

[lpmax]

Just bought a 1985 Chieftain 22ft (chevy). We can't seem to find the fuse box. The book says "under the IP on the driver's side." It is not obvious - before we really start taking things apart I thought someone might know where it is. This is my first post sorry if I'm asking in the wrong place! thank you

[Nomad Mike]

Originally Posted by lpmax

Just bought a 1985 Chieftain 22ft (chevy). We can't seem to find the fuse box. The book says "under the IP on the driver's side." It is not obvious - before we really start taking things apart I thought someone might know where it is. This is my first post sorry if I'm asking in the wrong place! thank you

Start here and click "New Thread" near the top left.

Give it a good title such as "Can't find my fuse box on 1985 Chieftain".

and

[lpmax]

Thank You for pointing me in the right direction!

[QUOTE=Nomad Mike;2755725]Start here and click "New Thread" near the top left.

Give it a good title such as "Can't find my fuse box on 1985 Chieftain".

[doit2010]

i own a 2016 minnie winne 22R, i do not see any information for the 2016's?? What am i doing wrong

[DriVer]

Originally Posted by doit

i own a 2016 minnie winne 22R, i do not see any information for the 2016's?? What am i doing wrong

I was able to bring up 2016 Minnie Winnie information - no problem.

Try this link:
2016 Winnebago Minnie Winnie

[Petesflhtk]

Originally Posted by tbrannon

i don't know if i am doing something wrong, but i cannot get the wiring and plumbing to show anything. any suggestions would be appreciated.
thanx, tgbrannon@numail.org

I can't get any of the diagrams to come up..I am on Apple products but haven't had problems with PDFs. Any one have a suggestion?

[Nomad Mike]

Originally Posted by Petesflhtk

I can't get any of the diagrams to come up..I am on Apple products but haven't had problems with PDFs. Any one have a suggestion?

Looks like a problem on their end as I tried with my iPhone and they would not work either but my year's worked fine.

I will try tomorrow on a PC, but I used both Safari and Chrome.