2017 King Aire CMS System (Collision Mitigation System) Question

[YabbaDabbaDo]

Does anyone have the CMS system installed on their 2017 King Aire and understand the number values displayed on the screen for the system?

In the picture below the number values between the target vehicle ahead and the coach show "101 over 110" and a "4.0". I believe the 101 and 110 numbers are showing k/mh (kilometers) of the target and coach instead of MPH. Not sure what the "4" value means unless it is the number of seconds between target vehicle and the coach ......

My question is, if you have the system, does yours show metric (k/mh) or US (mph)? Any input? Thanks

[Gordon Dewald]

The 101 could be the speed in km but if so is close but not correct. 100 km is 62 mph.

I wonder if the 101 is the speed and 110 is the speed limit?

Based on the graphics I would agree that the 4 is likely the time between the coach and the car in front.

[YabbaDabbaDo]

Originally Posted by Gordon Dewald

The 101 could be the speed in km but if so is close but not correct. 100 km is 62 mph.

I wonder if the 101 is the speed and 110 is the speed limit?

Based on the graphics I would agree that the 4 is likely the time between the coach and the car in front.

Gordon, thanks for your input but I don't think it is related to speed limit. I believe it is showing the speed of the target and the coach. I am talking with Silverleaf and they are reviewing the system. I don't understand why they would not show in MPH. Will post as I learn more

[rewillia]

May be its reporting the actual distance between you and the vehicle ahead (i.e. 101-110) and the stopping distance in seconds (i.e. 4.0). As well suspect it just a matter of selecting MPH in the set-up menu.

[YabbaDabbaDo]

rwillia
The set up menu for the Silverleaf interface is set to "MPH".

I tried changing to metric and then back to US for MPH in the setup menu but that change only effects the "miles/empty" and "trip" shown in the lower right corner of the display.