Ac problem

[Mahakal]

Hello everyone,
I have an Ac problem. Front and the rear Ac do not work even after genny is on. The breaker look good. What else should I look at. Thanks

[94-Newmar]

"do not work even after genny is on" is a broad term.

Does this mean they aren't doing anything (even the fans within them) even if plugged into at least 30amp shore power? Are the thermostat(s) displaying the mode properly yet nothing still happens?

["007"]

You have to program both AC's for cool in both zones 1&2 on your Control, maybe take it off furnace.
There will be a 2 min delay before you hear the compressors.

[Mahakal]

Hi,
When I connect to shore power they work. When I switch to generator even after an hour nothing works. Also noticed none of the appliances work on generator.

[CLIFFTALL]

Originally Posted by Mahakal

Hi,
When I connect to shore power they work. When I switch to generator even after an hour nothing works. Also noticed none of the appliances work on generator.

Your generator should have a circuit breaker or two. If they're in the off position , the appliances won't work.

[Route 66]

I agree with checking the circuit breaker(s) on the generator.

If they are on, the next thing to check is the transfer switch.

Originally Posted by Clifftall

Your generator should have a circuit breaker or two. If they're in the off position , the appliances won't work.

[Mahakal]

Thanks guys I will definetly check today. I will keep you guys posted.

[Mahakal]

Thanks a million folks. It was the inline breaker that was off. Now everything is working the way it is supposed to. You guys are awesome.

[CLIFFTALL]

Thanks for the update. Glad it worked for you.