iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi wrb7636,
Welcome to iRV2 and the Newmar Owners Forum. If you can get a number off the current part, enter it into Google. Many times that is all one needs to do to bring up choices for replacement.
__________________
Gary
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
The gauge is not working. It is stuck at mid scale. I googled in the part number but did not have any luck there. I am going to check on who made it. Then check with them. Thanks for your responses.
There is a replacement gauge but it does not have the alarm feature.
Spartan has 6 of these gauges remaing in stock. They want $212.01 for the gauge. The replacement gauge is $59.95.
I am not sure about the connector on the back so I am not sure how it will install. I am waiting for a Stewart Warner distributor in Houston who is trying to find me a compatible gauge. I may end up buying the original equipment gauge just to simplify the installation if I can figure out the locking mechanism on the plug to the back of the gauge.
Update, I was able to find the sending units to the air gauges due to another post on the site. I was able to swithch the connectors on the back of the sending units and found that the sending unit was bad and not the gauge. I have ordered a new sending unit form Spartan, probably got ripped off for that, but I was tried of dealing with the problem and the sending unit was $100 vs $211 for the gauge.
Sending units on my 2000 DSDP are located under the coach under the drivers seat. Do not have to move out the generator out to get to them. Very easy to get too. Never have figured out how to release the connectors on the back of the gauge. Maybe on day I will figure it out.