Changing Keyless Entry Code.

[MA4529]

I would like to change my Keyless Entry code, does any know where the programing switch is located?

[MA4529]

I would like to change my Keyless Entry code, does any know where the programing switch is located?

[Ecker]

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by MA4529:
I would like to change my Keyless Entry code, does any know where the programing switch is located? </div></BLOCKQUOTE>
================================================
Under passenger side cup holder on my 06

[soricobob]

On our Essex it was under the passenger electronic controls, so we had it extended up so we could easily change the code.

[Ronnie Bledsoe 2006 Dutchstar 43']

Some of the newer units are programmed from the keyless enty pad. Check your instructions...I don't have mine here at the house but if you need them send me a PM and I'll go to the storage area and get them.

Ronnie

[DonnaB]

On our 2007 DS the button is on the back side of the passenger cupholder/console.

[sjcaldal11]

In my 2006 they forgot to put the switch in and the dealer had to install one in the passenger side control area.

Thanks, Daryl

[Ronnie Bledsoe 2006 Dutchstar 43']

I forgot to mention that the keypad on my 2006 was defective and was replaced in Nov. of 2007.
My original unit did not have a way of changing the code as Newmar failed to install the switch.

[MA4529]

I found it, small plunger switch on the right hand side of the passengers cup holder/console. Thanks for the reply's. You guys are a wealth of information !!!!