Clarion navigation volume

[BBelanger]

When my NX405 interrupts the music you give me navigation instructions, the volume is very low. The music is at volume 26 and the navigation comes in at 16. Does anyone know how to adjust the volume of the navigation prompts?

[BBelanger]

Found the answer. When the voice prompt comes on, turn the volume up. When the voice came on I was turning the volume down thinking I was turning the music down.

[stang37]

This is a little confusing to me, but managed to make the changes.

Check page 43 in your users manual. That is the start of setup of the navigation

4.3 Settings menu
You can configure the navigation settings, and modify the behavior of NX405.

4.3.2 Sound settings
You can modify the following settings:

[PanJH]

Originally Posted by BBelanger

Found the answer. When the voice prompt comes on, turn the volume up. When the voice came on I was turning the volume down thinking I was turning the music down.

I did the same thing--- was driving me crazy until I figured it out.

[JohnT]

Originally Posted by PanJH

I did the same thing--- was driving me crazy until I figured it out.

Same way I figured it out too.

I'm old and need simple instructions.

Something like this. Dometic CCC thermostat: Set the Fan speed to Auto when using the Furnace mode. (otherwise and not stated, the CCC defaults to Heat Pump and the AC starts up).

[Dutch Star Don]

Not everyone knows, but I'll guess 99% of all radios will allow you to just the volume level of a certain function, when that function is operating, like when the GPS is voicing directions.