Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 01-05-2015, 10:40 AM   #1
Junior Member
Join Date: May 2011
Posts: 14
Clearance light issues

How do you change the clearance light fixture on the rear of a 2007 Newmar Kountry Star? I have removed the 2 screws but the fixture will not come loose.

logden is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-05-2015, 12:02 PM   #2
Senior Member
Rotten-Red's Avatar
Join Date: Jan 2012
Location: Benton Harbor, Michigan
Posts: 737
It's probably just stuck down with silicone caulk. They usually put silicone around the light to seal it. Use a thin scraper to get between the body and light and pry it loose.

2000 DSDP3858
2007 Saturn Vue AWD V6
Rotten-Red is offline   Reply With Quote
Old 01-05-2015, 12:18 PM   #3
Senior Member
dennis45's Avatar

Join Date: Jun 2012
Location: BC
Posts: 6,842
Originally Posted by Rotten-Red View Post
It's probably just stuck down with silicone caulk. They usually put silicone around the light to seal it. Use a thin scraper to get between the body and light and pry it loose.
Right on. Also, when you go to install the replacement (I assume you are replacing with a new fixture), you will want to reseal the back with a generous coating of RTV Silicone.

One other tidbit, when you remove the old fixture, before you cut the wires, tie a piece of wire, string or facsimile to the wires so you don't loose them down inside the cavity. I can tell you this will save you a lot of time by not having to fish them out.

Below is a link to another thread on this subject that might help source new lights if required.

Resealing marker lights ?
Dennis & Carol
Said so long to our DSDP. Coming Soon, 2019 Unity LTV CB - 2013 Honda CRV, BlueOx Baseplate, Aventa Bar & Patriot Brake. And the 04 Bird
dennis45 is online now   Reply With Quote
Old 01-05-2015, 04:40 PM   #4
Senior Member
GaryKD's Avatar
Newmar Owners Club
Join Date: Jul 2006
Location: Wellington, Florida
Posts: 12,533
Hi logden,
The previous posts are good information for replacing the fixture. However, if you are trying to replace the light, that is another remedy.
2005 Newmar KSDP 3910 + GMC ENVOY XUV 37K lbs Moving Down The Road
The Avatar Is Many Times Around The USA
Nobody Knows Your Coach Like Somebody Who Owns One Just Like Yours
GaryKD is offline   Reply With Quote
Old 01-06-2015, 06:16 AM   #5
Junior Member
Join Date: May 2011
Posts: 14
Thanks, I got the fixture off. The silicon was sealed around the wires and I had to really pull on the fixture to get it loose from the caulking.
logden is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bounder: Under Step light and Driver Side Porch Light eschmitt Fleetwood Products Owner's Forum 9 10-03-2014 06:45 PM
Water in fuel light and check engine light Donny Q Cummins Engines 4 09-24-2014 09:44 AM
2004 Vectra Backup Light info emiddleb Winnebago Industries Owner's Forum 1 09-17-2014 01:49 PM
LED clearance light help!! fleetwood bounder BOUNDER45601 Class A Motorhome Discussions 16 04-08-2014 06:47 AM
Solar panel monitoring light w diode donnyjay MH-General Discussions & Problems 2 03-28-2014 09:44 AM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 07:47 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.