Community Forums

KO 59 · 02-17-2019, 10:10 AM

Would anyone be able tell me if I where to contact the Newmar factory in Indiana if they would be able to supply me with a dead bolt key for the front entry door?
The door latch has the two keys 1st is for the dead bolt and 2nd is for pull handle lock
I have tried a lock smith with no luck.
To keep it simple I will not get into why we have no keys for the dead bolt

Our coach is a 2006 Newmar DP model 4141, on the outside chrome circle where the key is inserted (key barrel) it has the letters EXB. I do as well have the Newmar serial number of the coach which I would supply

I am located in south western Ontario

Any assistance why be appreciated thanks in advance

KO

PaulTNaples · 02-17-2019, 10:14 AM

Try a locksmith with a security store. They have a wider variety of key blanks. I was able to get three sets made for each key.

Petesflhtk · 02-17-2019, 10:17 AM

Contact Newmar parts, they should be able to help you out..

Stuart W · 02-17-2019, 10:27 AM

https://www.trimarkcorp.com/en/zCate...opcategoryid=3
They can hook you up

Ken Gluckman · 02-17-2019, 01:35 PM

You can contact Derek Hochstetler in Newmar Parts. He is always very helpful.

800-731-8300

dhochstetler@newmarcorp.com

flyfishidaho · 02-23-2019, 06:11 AM

Newmar parts may be able to supply the key 'blank' but you will still have to have it cut to your lock. I had a lockout a couple of years ago and when the locksmith came to pick the lock I had him make extra keys. He told me the key's are a little longer than a standard household deadbolt, more tumbler pins and makes them a little more secure. Harder to pick and sometimes harder to find key blanks. A good reputable lock smith should be able to get an appropriate key blank and 're-key' the lock.