diamond shield repair

[icejim]

I have 2 small tears in the diamond shield, one has peeled a little, any suggestions for repair?

[DutchStar38]

I removed mine.

[Ramets]

The whole thing? How did you remove it with out tearing up the paint underneath?

["007"]

This thread may help.

[ottffss]

How the Diamond Shield folks have such a steady hand is beyond me. They will cut the ripped portion of the tear out (so moisture won't get underneath - your worst nightmare) leaving a "hole" in the plastic just large enough such that all the edges are firmly attached. Just like the cuts around lettering, headlights, and the like. They just use a razor blade to do it.

[ddw1949]

This Diamond Shield you folks are discussing came on my 2009 canyon star. When I traveled to Florida I ended up with a mold growing under the film. I called Diamond Shield to no avail.... They said that Florida was the only place they heard of that you could pick up this mold spore....

[GaryKD]

Hi ddw1949,
DS lied to you. The mold problem is rampant. Heat and humidity do exacerbate the problem, but Florida is not the only place it occurs. I just took DS off my coach due to this problem.