Drivers map light

[bairdofl]

Can't seem to get the driver's side map light in our 2004 KSDP to work - ie turn on. I know that there are effectively three gotchas: the light at its base has to be on; the rocker switch on the side at elbow height has to be on; and the dash intensity pot needs to be rotated all of the way clockwise. There is a fourth - of course: the bulb needs to be OK. I've covered em all w/o resolution. I'm wondering if the potentiometer should have a "click" position at the most clockwise position; in short, if the pot may be the problem. Anybody got any ideas? I can't find a fuse specific to this area.

Thanks.

Jim

[Iron Man]

Yes there is a click position on the headlight switch. It is the same switch they used on autos in the 60's-90's. When that is set and the light switch is on you should have powr to the light fixture.

["007"]

If the click position has not been used in some time may have to click it a few times to remove oxidation on contacts to get instant reaction.