We bought a 2004 KSDP 3904 this summer, and although at this time we have no plans to pull a toad or a tandem axle trailer, I can't rule it out in the future. My question is, according to my owners manual there are two wires that run from the connector to the dash fuse panel. Where did you mount your electric brake control and what brand do you prefer?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
We bought a 2004 KSDP 3904 this summer, and although at this time we have no plans to pull a toad or a tandem axle trailer, I can't rule it out in the future. My question is, according to my owners manual there are two wires that run from the connector to the dash fuse panel. Where did you mount your electric brake control and what brand do you prefer?
Nor'easters Club Workhorse Chassis Owner iRV2 No Limits Club
Join Date: Oct 2004
Posts: 30,785
ddz1952, welcome to irv2 and the Newmar forum.
If you would go to "Find" just above you, you might find what you need. Type in "electric brake" and leave the check mark.
Enjoy all the forums and post often and if you want some KARMA let me know and I will put it in for you.
If you can't find what you need I'm sure someone will pop in here.
Linear Mode
