Front TV

[Jarhead1]

Thinking of replacing tv with new lcd.Problem is i can't see how the frame was put together re guarding screws plugs or anything.

Any help would be greatly appreciately.
My head is getting sore
Bill

[Spoonman]

Bill,
I have `02 Dutch Star on my front tv the front face frame is removed by removing long screws that are located in small cabinets on each side of tv.I backed these screws out about 1" or so and face frame pulled right off. Don`t know if all models are the same but worth a look.
Dick

["007"]

If there are no wood buttons on face or leather buttons underneath, Spoonman may have what you want.

[tmitchell]

On my 2004 DSDP there were 2 screws on the buttom of the cabinet covered with snap on round vinyl buttons. You just pop the covers off and remove the screws. There was also one each screw at each side that you access from the inside of the cabinets on either side. You will need a torx screwdriver for all the screws. After removing the screws the wood bezel pulls straight out, mine was fairly tight. The TV was trapped by sitting on 2 wooded blocks, so I had to lift the front of the set about 1/2" before it would pull out.
Tom

[oemtech]

Maybe this will help.... From my LCD Upgrade