Scott, thanks for the info....diagrams looked very similar so I set about making the adjustments as per instructions, started turning the rear allen head screw I/4 turn at a tine to bring awning in at stop position, after making almost a half a dozen complete turns with nothing happening, I decided to cycle the awning completely out and back in to see if it required that to recalibrate....to my surprise now the awning only went half way out ....well by now everybody has probably figured this one out, with the G2085 while the adjustment instructions are the same as those for the Nova, the adjustment screw locations on the G2085 are reversed from the Nova, ie. on the G2085 the rear screw adjusts the extend limit and the front screw adjusts the retract limit, just opposite of the Nova....good news is once you figure out which screw adjusts what, it is a very simple process