RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-27-2018, 05:00 PM   #1
Junior Member
Join Date: Jan 2008
Posts: 21
Help on slide roller replacement

Hi all, 2014 Canyon Star 3956 with 30k miles. Large driver side slide with appliances started squeaking when rolling in or out. It is the front roller (under the refrigerator) that makes an awful "dry bearing" squeal. I cannot even get my finger on it. How do you replace one. Lift up the slide edge or come in from outside?? I don't have a clue. Thanks for any advice and suggestions. Ken n Rita

Ken n Rita is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-27-2018, 06:55 PM   #2
Community Moderator
"007"'s Avatar

Nor'easters Club
Workhorse Chassis Owner
iRV2 No Limits Club
Join Date: Oct 2004
Posts: 28,790
Because of the size and weight of that slide I would suggest the factory or a highly recommended dealer.
You have nothing in your profile to indicate where you are located.
If you think you can do it yourself the slide spec's are in QT's 1 & 2 to show you how you would tilt the whole slide with additional help because of weight of slide.-- REPLACE SLIDE ROLLERS
Another important link needed and all links below have info for your Newmar.

98KSCA, 99MACA, 03 KSCA-3740- 8.1 Chev-- ALLISON Trans, now in good hands
"007" is offline   Reply With Quote
Old 05-27-2018, 10:44 PM   #3
Junior Member
Join Date: Jan 2008
Posts: 21
Very Helpful

Thanks 007, that was very helpful information. I may try the 2X8 wedged at the top as that lets the motor help with the lifting. However, the inner tube idea was brilliant! Thanks a many Ken n Rita
Ken n Rita is offline   Reply With Quote

ace, replace, replacement, slide

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide out rollar and roller mounting bracket replacement NZ Explorer Newmar Owner's Forum 3 03-12-2017 04:58 PM
Slide Roller Replacement ?? veraken Monaco Owner's Forum 8 04-01-2016 11:44 AM
Slide Roller Replacement loranimal Monaco Owner's Forum 4 07-27-2014 09:47 AM
Slide roller replacement Ed B Newmar Owner's Forum 1 03-27-2012 08:00 PM
Roller replacement -main slide tvace7 National RV Owner's Forum 0 09-11-2009 08:27 PM

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 09:18 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.