Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 07-18-2011, 12:47 PM   #1
Junior Member
 
Newmar Owners Club
Join Date: Jun 2010
Posts: 15
HWH jack solenoid replacement

How easy is this to do on the 325 series? I keep blowing the fuse on the right front and all points to a shorted selenoid. Thanks Art
__________________

afpoettcker is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 07-18-2011, 04:06 PM   #2
Senior Member
 
pkmesser's Avatar
 
Workhorse Chassis Owner
Join Date: Oct 2010
Location: Tehachapi, Ca
Posts: 558
1. Unclip power connector
2. Loosen solinoid by turning CC with chanel locks, finsih unscrewing by hand.
3. Reverse steps 1 and 2 to install new one.


Whole job less than 5 minutes.

If you are blowing fuses, and it is the solinoid coil, check it with an ohm meter, after step 1.
__________________

__________________
PKMesser
2005 KSCA 3778 on 04 W22
pkmesser is offline   Reply With Quote
Old 07-18-2011, 05:32 PM   #3
Registered User
 
Join Date: Mar 2011
Posts: 1,943
Just change the solenoid coil and not the whole valve. Never mind, all one piece. Here's parts for a 400. All the same
Attached Files
File Type: pdf HWH.pdf (32.4 KB, 180 views)
Perry White is offline   Reply With Quote
Reply

Tags
hwh, replacement



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HWH Jack Problem The Bay I MH-General Discussions & Problems 4 03-14-2011 07:41 AM
HWH Solenoid replacement Zbugsii MH-General Discussions & Problems 1 10-17-2010 06:54 PM
HWH Jack Question Chickadee Newmar Owner's Forum 18 01-02-2010 03:14 PM
HWH Jack Won't Stay Down EngineerMike MH-General Discussions & Problems 1 11-18-2009 02:11 AM
HWH jack question CMcCardell Winnebago Industries Owner's Forum 51 05-20-2009 09:12 PM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 08:48 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.