Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Newmar Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-05-2017, 03:39 PM   #1
owr
Senior Member
 
Tiffin Owners Club
Join Date: Jun 2015
Posts: 102
In search of penguin II HP install manual

Hi folks ,
I am trying to find an installation manual for a penguin II HP 15k btu ... i have a pair on my KSDP i am replacing.. old 13.5k btu straight air units with 15k btu HP units. I did months of research mostly on here and it seemed pretty doable. Now i have them and have 1 mounted i can'tseem to find any install instructions anywhere.
I read some bits today that heat pumps need 12V DC ? My existing units dont have 12 DC wired to them ...But everyone i talked to said these were direct replacement except for the tstat had to be replaced and I'm aware of those issues. And I saw somewhere today that there may be an issue with the RJ 45 not being pinned the same .... so that's why I'm looking for an install manual.

MFG #651816C751JO
product #936000750
ser#63327097
model 651816CXX1JO

thanks in advance for any assistance you can lend !

phil
__________________

__________________
2018 Tiffan Phaeton 40IH diesel pusher..
Cummins /Allison 10 KW gen,
Demsco SS dolly
owr is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-05-2017, 06:50 PM   #2
Senior Member
 
1doodadd's Avatar
 
Join Date: Dec 2016
Location: So Cal
Posts: 429
Found this link on the site Dometic Penguin II Installation Instructions
__________________

__________________
1doodadd is offline   Reply With Quote
Old 03-05-2017, 07:48 PM   #3
Senior Member
 
Luv2go's Avatar
 
Newmar Owners Club
Nor'easters Club
Appalachian Campers
Ford Super Duty Owner
Coastal Campers
Join Date: Dec 2007
Posts: 1,838
If your existing Penguin units are either the 4 button or 5 button they have 12V supplied at one of the two A/C units. The second gets it's 12V from the first thru the RJ-11 cable.

I replaced a 5 button CCC plus two old Penguin units with the new CCC2 control and two new Penguin II's, a 15K and 13.5K. The 15K had the exact same part number as yours. It was a simple change, IIRC the front had the 12V supply from the coach, or course yours may be different depending on how Newmar wired them.

The install instructions for the Penguin II 651816 heat pumps with the CCC2 thermostats are here. I also have another manual which seems almost identical but I can't find it online, PM me for a copy. Both manuals cover all the more recent Dometic units, so don't be put off by the reference to Brisk II in the link.

As far as I can tell by reading the manuals, the RJ11 cables are identical for 4 and 5 button CCC thermostats, you should not have any issues upgrading from either to the CCC2.

Don't forget the L-shaped gasket between the supply and return on the units themselves. They don't come this way from Dometic, you can purchase the gaskets from Newmar.
__________________
Stewart, Brenda and kids
2008 Newmar Canyon Star 3410
2006 Roadtrek Versatile 210
Luv2go is offline   Reply With Quote
Old 03-06-2017, 05:32 AM   #4
owr
Senior Member
 
Tiffin Owners Club
Join Date: Jun 2015
Posts: 102
thanks for the responces!

Thanks folks !!

The information was exactly what I needed I spent a couple hours on line and found nothing on these particular units !!lol I was sure I did my homework and then ran into a sumation of several posts on the subject with all the information that seems contrary to what I had learned...

As always you have been a great help !


Phil
__________________
2018 Tiffan Phaeton 40IH diesel pusher..
Cummins /Allison 10 KW gen,
Demsco SS dolly
owr is offline   Reply With Quote
Reply

Tags
manual, install



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replace older Dometic Penguin Heat Pumps with Newest Penguin II Units. shaman52 Newmar Owner's Forum 25 07-21-2017 06:58 AM
Penguin II heat pump manual red_georgia Monaco Owner's Forum 12 09-12-2016 03:38 PM
Owners Manual - Wiring Diagrams - Parts Manual - Repair Manual dapperphil Monaco Owner's Forum 5 07-14-2013 11:39 AM
OWNERS MANUAL SEARCH PEHELMS Newmar Owner's Forum 1 06-12-2007 12:43 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 03:15 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.